Bayanan asali
Nau'in asali:
1.Insulated guda madugu style
2.Twin madugu salon
3.Un-insulated igiya karshen hannayen riga
Halaye
Jimlar giciye-sashe: 0.25 ~ 150mm²
Launi mai launi da girman bututu zuwa DIN 46228, Sashe na 4 (0.5 ~ 50mm²)
Halide kyauta, mai ɗaukar wuta zai iya karɓa
Heat resistant zuwa 105 ℃ (PP) 120 ℃ (PA)
Abu:
99% tsaftataccen Copper
roba: Polypropylene (PP), Polyamide (PA)
Surface
Tin-plated don kariya daga lalata
Bayanin oda
Yanzu kuma ana samun su a cikin akwatunan filastik masu amfani don ƙananan buƙatu.A ƙarƙashin yanayi na al'ada ba mu da buƙatun MOQ don marufi na jaka.
Bayanan Fasaha
Abubuwan Gudanarwa (sai dai Madaidaicin Haɗin Haɗi)
| Copper | 99.9% tsarki |
| Ƙarfin Ƙarfi | 200MPa |
| Ƙimar Ductile | 35% |
| Karfe Jihar Karfe | Wani sashi na samfurin ya goge |
| Abun Oxygen | 50ppm max |
|
|
|
| Brass | 30% Zinc 70% Copper |
| Ƙarfin Ƙarfi | 580 Mpa |
| Ƙimar Ductile | 6% min |
| Karfe Jihar Karfe | Wani sashi na samfurin ya goge |
|
|
|
| Kayan abu | Tin |
| Abun cikin Tin | 99.90% |
| Sauran Karfe | Gubar + Antimony |
| Plating Kauri | 1.5 microns |
|
|
|
| Gabaɗaya Haɓakawa | 98.5% IACS |
| Jimlar Juriya | 1.738 micro-ohm cm |
|
|
|
| Kayan abu | PVC ga kowa banda nailan 6 ko nailan 66 - don IQC |
| Rashin wutar lantarki | 1.5k V (minti) |
| Juriya na rufi | Sama da 100 meg ohms |
| Wutar lantarki mai aiki | Har zuwa 300V AC / DC |
|
|
|
| Pre-Insulate | -40 ℃ zuwa +150 ℃ |
| Brass | 145 ℃ |
| Tin plated | 160 ℃ |
BAYANI
| Sashin giciye (mm²) | Abu Na'a. | Girma (mm) | AWG |
| Sashin giciye (mm²) | Abu Na'a. | Girma (mm) | AWG | ||||||
| L | W | D | C |
| L | W | D | C | ||||||
| 0.25 | EN0206 | 6 | 1.5 | 1.1 | 0.8 | #26 |
| 10 | EN 10-18 | 18 | 5.8 | 4.9 | 4.5 | #8 |
| EN0208 | 8 |
| EN10-20 | 20 | ||||||||||
| 0.34 | EN0306 | 6 | #24 |
| EN10-25 | 25 | ||||||||
| EN0308 | 8 |
| 16 | EN16-12 | 12 | 7.2 | 6.2 | 5.8 | #6 | |||||
| 0.5 | Farashin EN0506 | 6 | 1.7 | 1.3 | '1.0 | #22 |
| EN16-16 | 16 | |||||
| Farashin EN0508 | 8 |
| EN16-18 | 18 | ||||||||||
| Farashin EN0510 | 10 |
| EN16-20 | 20 | ||||||||||
| Farashin EN0512 | 12 |
| EN16-22 | 22 | ||||||||||
| 0.75 | Saukewa: EN7506 | 6 | 1.9 | 1.5 | 1.2 | #20 |
| EN16-25 | 25 | |||||
| Saukewa: EN7508 | 8 |
| 25 | EN25-12 | 12 | 9.1 | 7.9 | 7.5 | #4 | |||||
| EN7510 | 10 |
| EN25-16 | 16 | ||||||||||
| EN7512 | 12 |
| EN25-18 | 18 | ||||||||||
| 1.0 | EN1006 | 6 | 2.2 | 1.7 | 1.4 | #18 |
| EN25-22 | 22 | |||||
| EN1008 | 8 |
| EN25-25 | 25 | ||||||||||
| EN1010 | 10 |
| 35 | EN35-16 | 16 | 10.2 | 8.7 | 8.3 | #2 | |||||
| EN1012 | 12 |
| EN35-20 | 20 | ||||||||||
| EN1018 | 18 |
| EN35-25 | 25 | ||||||||||
| 1.5 | EN1508 | 8 | 2.5 | 2.0 | 1.7 | #16 |
| 50 | EN50-12 | 12 | 12.7 | 10.9 | 10.3 | #1 |
| EN1510 | 10 |
| EN50-18 | 18 | ||||||||||
| EN1512 | 12 |
| EN50-22 | 22 | ||||||||||
| EN1518 | 18 |
| EN50-25 | 25 | ||||||||||
| 2.5 | EN2506 | 6 | 3.3 | 2.6 | 2.3 | #14 |
| 70 | Saukewa: EN70-22 | 22 | 15.8 | 14.3 | 13.5 | 2/0 |
| EN2508 | 8 |
| EN70-25 | 25 | ||||||||||
| EN2510 | 10 |
| EN70-32 | 32 | ||||||||||
| EN2512 | 12 |
| 95 | EN95-25 | 25 | 17.3 | 15.6 | 14.8 | 3/0 | |||||
| EN2518 | 18 |
| EN95-30 | 30 | ||||||||||
| 4 | Saukewa: EN4009 | 9 | 3.9 | 3.2 | 2.8 | #12 |
| EN95-34 | 34 | |||||
| EN4012 | 12 |
| 120 | EN120-30 | 30 | 20.2 | 17.7 | 16.7 | 4/0 | |||||
| EN4018 | 18 |
| EN120-34 | 34 | ||||||||||
| 6 | EN6010 | 10 | 4.7 | 3.9 | 3.5 | #10 |
| EN120-38 | 38 | |||||
| EN6012 | 12 |
| 150 | EN150-32 | 32 | 23 | 20.6 | 19.6 | 250/300 | |||||
| EN6018 | 18 |
| EN150-40 | 40 | ||||||||||
| 10 | EN10-12 | 12 | 5.8 | 4.9 | 4.5 | #8 |
| 185 | EN185-32 | 32 | 23.9 | 21.4 | 20.2 | 300/350 |
| EN10-16 | 16 |
| EN185-40 | 40 | ||||||||||
